4
Cleaning and Maintenance
Unplug the mini chopper from the mains power outlet.
Wash the bowl and blade assembly in warm soapy water. Rinse and dry thoroughly. Please use caution when
handling the blade as it is extremely sharp. The bowl and blade are dishwasher safe.
Wipe the motor unit with a soft damp cloth to clean. Do not use abrasive cleaning pads or chemicals.
Do not immerse the motor unit in water or any other liquid.
Changing the Plug
This mini chopper must be earthed. Fit a 3A fuse in a 13A BS1363 plug. Fit the
green/yellow wire to E, the blue wire to N and the brown wire to L. Fit the cord grip. If
in doubt, call an electrician. Don‟t use a non-rewireable plug unless the fuse cover is
fitted. If you remove the plug, dispose of it.
Troubleshooting
If you are having problems with your product please use our troubleshooting guide below. If you are
unable to resolve the issue using the guide please ring our Customer Service Department on
01473 271 272. Please have the model code, batch number and purchase information available.
The mini chopper does not work.
1. The motor unit is not correctly
aligned in place
2. Not properly plugged into the
mains wall socket.
3. No electricity in the mains wall
socket.
4. The motor may have overheated
1. Please ensure that the bowl and
motor unit is aligned and pushed
into place. If not the chopper will
not operate
2. Plug in firmly.
3. Check fuse or breaker.
4. The chopper should only be run
continuously for a maximum time
of 1 minute to prevent the motor
from over heating. After 1
minutes use allow the hand mixer
to cool down for 10 minutes.
Guarantee Information
This product is guaranteed for a period of 2 years from the date of purchase against
mechanical and electrical defects.
does not
cover consumable parts that require replacement under normal
use or accessories. This includes beaker, belts, and accessory attachments.
1. If a fault develops within 28 days of purchase the item should be returned to the
place of purchase for exchange.
2. If the fault develops after 28 days and within 24 months of purchase please contact
our customer service department 01473 271 272 or write to us at the address
detailed on page 5.
Please quote the model number which begins
IG, the „Batch Number‟ beginning ‘5’
and
give details of the exact fault.
We will then decide whether to repair or replace the item. You will be required to return a copy of your proof of
purchase. Please retain your original.
If an item is replaced under guarantee within 2 years, the guarantee for the replacement item will be calculated
from the purchase date of the original.
Before calling the Customer Service number please ensure you have checked the
Troubleshooting guide.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels